Home      Online Store      Events      Contact Us Sailing on RED!
 

Online store

Batteries

Brochure
Manual
Newsletter
WW Cleaning

Woods
    Bloodwood
    Bubinga
    Cherry
    Lacewood
    Maple
    Padauk
    Purpleheart
    Tigerwood
    Walnut
    Wenge
    Zebrawood

Detail views:
    Front View
    Right View
    Left View
    Top View
    Internals

Ratios
Specifications
Warranty

Events
Retreats

Owner Feedback
Reviews/Media
Video

Other espinners

Directions
History
About Us

 

HansenCrafts LLC
710 East Park Ave
Port Townsend, WA 98368
USA

(360) 747-7746

email us!


Top View of the miniSpinner  

This is another view with the flyer and bobbin assembly removed.  You can see the large sealed ball bearing at the orifice end on the left, the other bits shown in previous pages, and the self-aligning bearing at the right for the bobbin end of the flyer.  

Again, no lubrication is necessary or desired (you don't want a bunch of dirty oil messing up your nice, new miniSpinner, do you?)

To change bobbins, you simply open the latch, fold the back down as shown, and slide the bobbin off the flyer shaft (flyer not shown in this photo).


Previous Page Next Page

Site updated:  October 12, 2014

2005-2014 HansenCrafts LLC, all rights reserved