One of my first customers was kind enough to make a
video of the miniSpinner. This one has the standard
sliding-hook jumbo flyer.
The video gives you a good idea of its size and, particularly,
how quiet it is. Thanks, Amelia!
This is an early model. In the current model, the power
input has been relocated to the left side and the foot switch may
be configured by the user as either a "deadman" (press
for on, release for off) or a "tap-on/off"
mode. Your choice.
The current model also has a very soft start which ramps gradually
(but briskly) up to the speed you set when you turn it on with the
foot switch. This makes it easier to spin really fine fiber
without breaking on startup.
