Orifice Reducers  

The standard 5/8"(11mm) miniSpinner orifice is a bit large for some spinners, so we offer orifice reducers for those who want one.  Shown is the 3/8" reducer, which is a good all-around size.

A closer look at the reducers.  These fit miniSpinners equipped with either the HansenCraft flyer (shown above) or WooLee Winders.  1/8"(3mm) on the left, 1/4"(6mm) in the middle, 3/8"(10mm) on the right.